User's Manual

22 Preface
212160-B
Before using this guide, you must complete the procedures discussed in the
Business Policy Switch 2000 Installation Instructions.
Text conventions
angle brackets (< >) Indicate that you choose the text to enter based on the
description inside the brackets. Do not type the
brackets when entering the command.
Example: If the command syntax is
ip default-gateway <XXX.XXX.XXX.XXX>,
you enter
ip default-gateway 192.32.10.12
braces ({}) Indicate required elements in syntax descriptions
where there is more than one option. You must choose
only one of the options. Do not type the braces when
entering the command.
Example: If the command syntax is:
http-server {enable|disable}
the options for are enable or disable.
brackets ([ ]) Indicate optional elements in syntax descriptions. Do
not type the brackets when entering the command.
Example: If the command syntax is:
show ip [bootp],
you can enter either:
show ip or show ip bootp.
plain Courier
text
Indicates command syntax and system output.
Example:
TFTP Server IP Address: 192.168.100.15
vertical line | Separates choices for command keywords and
arguments. Enter only one of the choices. Do not type
the vertical line when entering the command.
Example: If the command syntax is:
cli password <serial|telnet>,
you must enter either cli password serial or
cli password telnet, but not both.
H.H.H. Enter a MAC address in this format
(XXXX.XXXX.XXXX).