User's Manual

Chapter 1 CLI Basics 45
Reference for the Business Policy Switch 2000 Command Line Interface
Table 5 describes the parameters and variables for the interface command.
disable command
The disable command returns you to the User EXEC (exec) command mode.
The syntax for the
disable command is:
disable
The disable command is in the privExec command mode.
The
disable command has no parameters or variables.
end command
The end command moves you to the priv Exec mode from either the Global
Configuration (config) mode or the Interface Configuration (config-if) mode.
The syntax for the
end command is:
end
The end command has no parameters or variables.
exit command
The exit command moves you around the command modes:
• In User EXEC (exec) and Privileged EXEC (privExec) command modes,
exit allows you to quit the CLI session.
Table 5 interface command parameters and variables
Parameters
and variables
Description
<portlist> Specifies the portlist you want to be affected by all the commands
issued in the config-if command mode.