User's Manual

Chapter 4 Setting up MultiLink Trunk ports 123
Reference for the Business Policy Switch 2000 Management Software Operations
MultiLink Trunk Ethernet error statistics
To view MultiLink Trunk Ethernet error statistics:
1 From the Device Manager menu bar, choose VLAN > MLT.
The MLT dialog box opens (Figure 49).
2 Select an MLT by clicking anywhere within a field in the row.
3 Click Graph.
The Statistics, MLT dialog box opens (Figure 51) with the Interface tab
displayed.
4 Click the Ethernet Errors tab.
The Ethernet Errors tab opens (Figure 52).
HCOutUcastPkts The number of packets that higher-level protocols
requested be transmitted that were not addressed to a
multicast address at this MLT.This total number includes
those packets discarded or unsent.
HCInMulticastPkt The number of packets delivered to this MLT that were
addressed to a multicast address at this sublayer. For a
MAC layer protocol, this number includes both Group and
Functional addresses.
HCOutMulticast The total number of packets that higher-level protocols
requested be transmitted, and that were addressed to a
multicast address at this MLT, including those that were
discarded or not sent. For a MAC layer protocol, this
number includes both Group and Functional addresses.
HCInBroadcastPkt The number of packets delivered to this MLT that were
addressed to a broadcast address at this sublayer.
HCOutBroadcast The total number of packets that higher-level protocols
requested be transmitted, and that were addressed to a
broadcast address at this MLT, including those that were
discarded or not sent.
Table 44 Interface tab fields (continued)
Field Description