User's Manual

142 Chapter 6 Creating and managing multiple STGs
209322-B
The Insert Configuration dialog box for creating STGs opens (Figure 64).
Figure 64 STG, Insert Configuration dialog box
Table 50 describes the STG, Insert Configuration tab fields.
Adding ports to an STG
To add ports to an existing STG:
1 From the Device Manager menu bar, choose VLAN > STG.
Table 50 STG, Insert Configuration tab fields
Field Description
Id Enter an integer between 1 and 25 that identifies the STG; 1
is the default STG.
Priority Enter the first two octets of the 8-octet bridge ID; range is 0 to
65535.
BridgeMaxAge Enter the maximum time you want to allow before the
specified STG times out, in seconds; range is 600 to 4,000.
BridgeHelloTime Enter the maximum time between hellos, in seconds; range
is 100 to 1,000.
BridgeForwardDelay Enter the maximum delay in forwarding, in seconds; range is
400 to 3,000.
PortMembers Click the ellipsis to open the dialog box that allows you to
specify which ports to be members of the specified STG.