User's Manual

160 Chapter 7 Configuring QoS
209322-B
Managing QoS Rules
Displaying IP Filters
To display IP filters:
➨ From the Device Manager menu bar, choose QoS/COPS > QoSRules.
The QoSRules dialog box opens with the IP filter tab displayed (Figure 78).
Figure 78 IP filter tab
Table 60 describes the IP filter tab fields.
Table 60 IP filter tab fields
Field Description
Id The filter identifier.
DstAddr The IP address that matches the packet’s destination IP
address.
DstAddrMask The mask for matching the destination IP address.
SrcAddr Specifies the source address to match against the packet’s
source IP address.
SrcAddrMask The mask for matching the source IP address.
Dscp The value that the DSCP in the packet must have and match
the filter.
Protocol The protocol that is matched against the packet’s IP protocol
field.