User's Manual

164 Chapter 7 Configuring QoS
209322-B
Figure 81 Insert IP filter group dialog box
4 Enter the information you want to use for this IP filter group.
5 Click Insert.
Deleting IP filter groups
To delete an IP filter groups:
1 From the Device Manager menu bar, choose QoS/COPS > QoS Rules.
The QoSRules dialog box opens with the IP filter tab displayed (Figure 78).
2 Click the IP filter group tab.
The IP filter group tab opens (Figure 80).
3 Highlight the IP filter group you want to delete.
4 Click Delete.
Note: You cannot delete an IP filter group if it is the last entry for a
given filter group or if the group is referenced by a policy. You must first
delete the policy.