User's Manual

Chapter 7 Configuring QoS 175
Reference for the Business Policy Switch 2000 Management Software Operations
Table 66 describes the QoS policies tab fields.
Adding QoS policies
To add a QoS policy:
1 From the Device Manager menu bar, choose QoS/COPS > QoS.
The QoS dialog box opens with the QoS action tab displayed (Figure 86).
2 Click the QoS policies tab.
The QoS policies tab opens (Figure 90).
3 Click Insert.
The Insert QoS policies dialog box opens (Figure 91).
Table 66 QoS policies tab fields
Field Description
Id The unique identifier for this policy entry.
FiterGroupType Specifies the type of filter group.
FilterGroupId The filter group associated with a policy.
RoleCombination A tag that identifies the interfaces to which a policy
specification applies.
InterfaceDirection Specifies direction of packet flow at the specified interface.
Business Policy Switch 2000 only supports ingress.
Order The number used to determine the order of precedence for a
policy specification.
Meter Specifies the meter associated with a policy.
TrackStatistics Specifies whether statistics tracking is enabled or not.