User's Manual

218 Chapter 10 RMON
209322-B
3 Click the Ether Stats tab to view statistics (Figure 108 on page 204).
The RMONAlarms dialog box opens with the Alarms tab (Figure 120)
displayed.
To delete an alarm:
1 From the Device Manager main menu, choose RMON >Alarms.
The RMONAlarms dialog box opens with the Alarms tab (Figure 120)
displayed.
Figure 120 RMONAlarms dialog box — Alarms tab
2 Click any field for the alarm that you want to delete to highlight it.
3 Click Delete.
Table 86 describes the fields on the Alarms tab.
Table 86 Alarms tab fields
Field Description
Index Uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic
sample at a particular interval for an object on the device
Interval The interval in seconds over which data is sampled and compared with the rising and
falling thresholds. When setting this variable, note that in the case of deltaValue
sampling, you should set the interval short enough so that the sampled variable is very
unlikely to increase or decrease by more than 2^31 - 1 during a single sampling
interval.
Variable The object identifier of the particular variable to be sampled. Only variables that resolve
to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks)
may be sampled.