User's Manual

30 Chapter 1 Device Manager basics
209322-B
Figure 2 Device Manager Properties dialog box
2 Type information and select check boxes.
3 Click OK.
Table 1 describes the Properties dialog box items.
Table 1 Properties dialog box items
Area Item Description
Polling Status Interval Interval at which status information is gathered (default is
300 seconds). For a full stack, set this interval to 60 seconds.
(If Traps, Status
Interval: )
Interval at which statistics and status information are
gathered when traps are enabled. The default is 300.
Hotswap Poll Interval The interval at which Device Manager polls for module
information. The default is 60 seconds.
Enable Enables (true) or disables (false) periodic polling of the
device for updated status. If polling is disabled, the chassis
status is updated only when you click Refresh on the Chassis
tab.