User's Manual

66 Chapter 2 Configuring and graphing the switch
209322-B
Figure 25 Edit Chassis dialog box — Agent tab
Table 20 describes the Agent tab fields.
SNMP tab
The SNMP tab provides read-only information about the addresses that the agent
software uses to identify the switch.
To open the SNMP tab:
1 Select the chassis.
2 From the shortcut menu, choose Edit > Chassis.
The Chassis dialog box opens (Figure 22) with the System tab displayed.
3 Click the SNMP tab.
The SNMP tab opens (Figure 26).
Table 20 Agent tab fields
Item Description
NextBootpAddr The IP address of the BootP server to be used the next
time the switch is booted.
NextBootNetMask The subnet mask to be used the next time the switch is
booted.
ValidFlag Indicates if the configuration and/or image file(s) were
downloaded from this interface and if the file names have
not been changed.
BootRouterAddr The IP address of the boot router for the configuration file
and/or the image file.
MacAddr The switch’s MAC address.