User's Manual

Chapter 3 Configuring and graphing ports 99
Reference for the Business Policy Switch 2000 Management Software Operations
EAPOL tab for multiple ports
The EAPOL tab shows EAPOL statistics for the selected ports.
To view or edit the EAPOL tab for multiple ports:
1 Select the ports that you want to edit.
[Ctrl] + left-click the ports that you want to configure. A yellow outline
appears around the selected ports.
2 Do one of the following:
• From the shortcut menu, choose Edit.
• From the Device Manager main menu, choose Edit > Port.
• On the toolbar, click Edit.
The Port dialog box for a multiple port (Figure 36) opens with the Interface
tab displayed.
3 Click the EAPOL tab.
The EAPOL tab opens (Figure 42).
DiscardUntaggedFrames This field only applies to trunk ports. It acts as a flag used to
determine how to process untagged frames received on this
port. When the flag is set, the frames are discarded by the
forwarding process. When the flag is reset, the frames are
assigned to the VLAN specified by rcVlanPortDefaultVlanId.
DefaultVlanId The VLAN ID assigned to untagged frames received on a
trunk port.
Table 35 VLAN tab fields for multiple ports (continued)
Field Description