Configuration manual

Chapter 9 Network Address Translation (NAT) 131
Nortel Business Secure Router 222 Configuration — Advanced
End Port Enter a port number or the ending port number in a range of port
numbers.
7170
Trigger The trigger port is a port (or a range of ports) that causes (or
triggers) the Business Secure Router to record the IP address of
the LAN computer that sent the traffic to a server on the WAN.
Start Port Enter a port number or the starting port number in a range of
port numbers.
7070
End Port Enter a port number or the ending port number in a range of port
numbers.
7070
Press [ENTER] at the message “Press ENTER to Confirm...” to
save your configuration, or press [ESC] at any time to cancel.
Table 32 Menu 15.3: Trigger Port setup description
Field Description Example