Configuration manual

144 Chapter 11 Filter configuration
NN47922-501
Figure 66 illustrates the logic flow of an IP filter.
Log Press [SPACE BAR] and then [ENTER] to select a
logging option from the following:
None – No packets are logged.
Action Matched - Only packets that match the rule
parameters are logged.
Action Not Matched - Only packets that do not
match the rule parameters are logged.
Both – All packets are logged.
None
Action
Matched
Action Not
Matched
Both
Action Matched Press [SPACE BAR] and then [ENTER] to select the
action for a matching packet.
Check Next
Rule
Forward
Drop
Action Not Matched Press [SPACE BAR] and then [ENTER] to select the
action for a packet not matching the rule.
Check Next
Rule
Forward
Drop
After you configure Menu 21.1.1.1 - TCP/IP Filter
Rule, press [ENTER] at the message “Press ENTER
to Confirm” to save your configuration, or press
[ESC] to cancel. This data is displayed on Menu
21.1.1 - Filter Rules Summary.
Table 35 TCP/IP Filter Rule Menu fields
Field Description Options