Configuration manual

150 Chapter 11 Filter configuration
NN47922-501
Figure 70 Example Filter Rules Summary: Menu 21.1.3
After you have created the filter set, you must apply it.
1 Enter 11 from the main menu to go to menu 11.
2 Then enter 1 to open Menu 11.1 Remote Node Profile.
3 Go to the Edit Filter Sets field, press [SPACE BAR] to select Yes and press
[ENTER].
4 This brings you to menu 11.1.4. Apply a filter set (our example is filter set 3)
as shown in Figure 73.
5 After you enter the set numbers, press [ENTER] to confirm and leave menu
11.1.4.
Menu 21.1.3 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- --------------------------------------------------------------- -
- -
1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23 N D F
2 N
3 N
4 N
5 N
6 N
Enter Filter Rule Number (1-6) to Configure: 1