Configuration manual

Chapter 14 System information and diagnosis 167
Nortel Business Secure Router 222 Configuration — Advanced
Figure 81 Menu 24.1: System Maintenance: Status
Table 41 describes the fields present in Menu 24.1 - System Maintenance -
Status. These fields are read-only and meant for diagnostic purposes. The upper
right corner of the screen shows the time and date according to the format you set
in menu 24.10.
Figure 82 Menu 24.1 — System Maintenance — Status
Menu 24.1 - System Maintenance - Status 00:02:07
Thu. Jan. 01, 2004
Port Status TxPkts RxPkts Cols Tx B/s Rx B/s Up Time
WAN Down 0 0 0 0 0 0:00:00
LAN 100M/Full 12 7 0 0 64 0:00:10
Port Ethernet Address IP Address IP Mask DHCP
WAN 00:13:49:00:00:02 0.0.0.0 0.0.0.0 Client
LAN 00:13:49:00:00:01 192.168.1.1 255.255.255.0 Server
System up Time: 0:00:15
Name:
Routing: IP
RAS F/W Version: VBSR222_2.6.0.0.003b1 | 07/19/2006
Press Command:
COMMANDS: 1-Drop WAN 9-Reset Counters ESC-Exit
Table 41 System Maintenance: Status Menu Fields
Field Description
Port Identifies a port (WAN, or LAN) on the Business Secure Router.
Status Shows the port speed and duplex setting if you are using Ethernet
Encapsulation and Down (line is down), idle (line (ppp) idle), dial
(starting to trigger a call) or drop (dropping a call) if you are using
PPPoE Encapsulation.
TxPkts The number of transmitted packets on this port.
RxPkts The number of received packets on this port.
Cols The number of collisions on this port.
Tx B/s Shows the transmission speed in Bytes per second on this port.