Configuration manual

172 Chapter 14 System information and diagnosis
NN47922-501
Figure 87 Menu 24.3.2: System Maintenance: Syslog Logging
Configure the syslog parameters described in Table 43 to activate syslog, and then
choose what you want to log.
Your Business Secure Router sends five types of syslog messages. Some
examples of these syslog messages with their message formats are shown next:
CDR
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel
Table 43 System Maintenance Menu Syslog Parameters
Parameter Description
Syslog:
Active Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Syslog Server IP
Address
Enter the IP Address of the server that logs the CDR (Call Detail
Record) and system messages. For example, the syslog server.
Log Facility Press [SPACE BAR] and then [ENTER] to select a Local option.
Using the log facility, you can log the message to different files in
the server. Refer to the documentation of your syslog program for
more details.
After you finish configuring this screen, press [ENTER] to confirm or [ESC] to cancel.
CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str