Configuration manual

Chapter 16 System Maintenance menus 8 to 10 201
Nortel Business Secure Router 222 Configuration — Advanced
means that you must specify the type of netbios filter and whether to turn it on or
off.
Command usage
A list of commands can be found by typing help or ? at the command prompt.
Always type the full command. Type exit to return to the SMT main menu when
finished.
Figure 110 Valid commands
ras> ?
Valid commands are:
sys exit ether ip
ipsec bm certificates radius
8021x
Table 48 Valid commands
Command Description
sys The system commands display device information and configure device
settings.
exit This command returns you to the SMT main menu.
ether This commands display Ethernet information and configure Ethernet
settings.
ip This commands display IP information and configure IP settings.
ipsec This commands display IPSec information and configure IPSec settings.
bm This commands display bandwidth management information and
configure bandwidth management settings.
certificates This commands display certificate information and configure certificate
settings.
radius This commands display RADIUS information.
8021x This commands display IEEE 802.1x information.