Configuration manual

Appendix H Command Interpreter 275
Nortel Business Secure Router 222 Configuration — Advanced
subject [mail subject]
Sets the log e-mail’s subject.
auth
Enables or disables SMTP
authentication.
user
Sets the SMTP authentication
username.
passwd
Sets the SMTP authentication
password.
save
Saves the log settings from the buffer.
syslog
active [0:no/1:yes]
Enables or disables syslog logging.
display
Displays the syslog settings.
facility [Local ID(1-7)]
Specifies the file to which the device
logs the syslog messages.
server [domainName/IP]
Specifies the IP address of the syslog
server the syslogs are sent.
consolidate
switch <0:on|1:off>
Turns log consolidation on or off.
period
Sets the consolidation period (in
seconds).
msglist
Displays the consolidated messages.
updateSvrIP <minute>
Sets how often to resolve the mail and
syslog server domain name to an IP
address.
switch
bmlog <0:no|1:yes>
Turns the broadcast or multicast log on
or off.
display
Displays switch settings.
trilog <0:no|1:yes>
Turns triangle route logging on or off.
reboot [0:cold boot/1: immediate
reboot/2: bootModule debug
mode]
Restarts the device.
rn
load <entry no.>
Loads remote node information.
disp <entry no.>(0:working
buffer)
Displays remote node information.
Table 69 Sys commands
Command Description