Configuration manual

276 Appendix H Command Interpreter
NN47922-501
nat <none|sua|full_feature>
Configures remote node NAT.
nailup <no|yes>
Configures a remote node connection
to be nailed up (always on).
mtu <value>
Sets the remote node Maximum
Transmission Unit.
accessblock
Blocks access to a remote node.
save [entry no.]
Saves remote node information.
stdio [minute]
Sets or displays the management
terminal idle timeout value.
tos
display
Shows all runtime Temporarily Open
Sessions.
debug
Turns TOS debug message on or off.
listPerHost
Displays all hosts session counts.
sessPerHost
Sets the session per host limit.
timeout
display
Displays all TOS (Temporarily Open
Session) timeout information.
icmp
Sets the ICMP session idle timeout
value.
igmp
Sets the IGMP session idle timeout
value.
tcpsyn
Sets the SYN TCP session idle timeout
value.
tcp
Sets the TCP session idle timeout
value.
tcpfin
Sets the TCP FIN session idle timeout
value.
udp
Sets the UDP-session idle-timeout
value.
gre
Sets the GRE-session idle-timeout
value.
esp
Sets the ESP-session idle-timeout
value.
ah
Sets the AH-session idle-timeout value.
Table 69 Sys commands
Command Description