Configuration manual

280 Appendix H Command Interpreter
NN47922-501
Exit Command
Ethernet Commands
Table 71 lists and describes the Ethernet commands. Each of these commands
must be preceded by
ether. For example, type ether config to display
information on the LAN configuration.
restart
Restarts DDNS.
logout
This command has no effect.
cpu
display
Displays the CPU utilization.
Table 70 Exit Command
Command Description
exit
Ends the command interpreter session.
Table 71 Ether Commands
Command Description
config
Displays LAN configuration information.
driver
cnt
disp <name>
Displays the Ethernet driver counters.
status <ch_name>
Shows the LAN status.
version
Displays the Ethernet device type.
edit
load <1:LAN>
Loads Ethernet (1:LAN) data from the System
Parameters Table.
mtu <value>
Sets the Ethernet data Maximum Transmission
Unit.
Table 69 Sys commands
Command Description