Configuration manual

Appendix H Command Interpreter 281
Nortel Business Secure Router 222 Configuration — Advanced
IP commands
Table 72 lists and describes the IP commands. Each of these commands must be
preceded by
ip. For example, type ip address to display the host IP address.
accessblock <0:disable 1:enable>
Blocks Internet access.
speed <auto|10/half|10/
full|100/half|100/
full>
Sets the Ethernet data speed and duplex.
save
Saves Ethernet data to the System Parameters
Table.
dynamic
Port
dump
Displays the relationship between physical port
and channel.
set <port> <type>
Sets physical port to a specific channel.
spt
Displays channel setting stored in SPT.
Table 72 IP commands
Command Description
address [addr]
Displays the host IP address.
alias <iface>
Sets an alias for the specified interface.
aliasdis <0|1>
Disables or enables the alias for the specified
interface.
arp
status <iface>
Displays an interface’s IP Address Resolution
Protocol status.
attpret <on|off>
Allows or disallows the device to receive ARP
from a different network or not.
force <on|off>
Enables or disables the ARP timeout function.
dhcp <iface>
client
release
Releases the DHCP client IP address.
Table 71 Ether Commands
Command Description