Configuration manual

Appendix H Command Interpreter 283
Nortel Business Secure Router 222 Configuration — Advanced
add <dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
Adds a route.
addiface <dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
Adds an entry to the routing table for the
specified interface.
addprivate <dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
Adds a private route.
drop <host addr> [/
<bits>]
Drops a route.
status
Displays IP statistic counters.
udp
status
Displays the UDP status.
rip
These are the Routing Information Protocol
commands.
accept <gateway>
Drops an entry from the RIP refuse list.
activate
Enables RIP.
merge [on|off]
Sets the RIP merge flag.
refuse <gateway>
Adds an entry to the RIP refuse list.
request <addr> [port]
Sends a RIP request to the specified address
and port.
reverse [on|off]
RIP Poisoned Reverse.
status
Displays RIP statistic counters.
trace
Enables the RIP debug trace.
mode
<iface> in [mode]
Sets the Business Secure Router to use the
RIP information it receives.
<iface> out
[mode]
Sets the Business Secure Router to broadcast
its routing table.
dialin_user [show|in|out|both
|none]
Shows the dial-in user RIP direction.
tcp status
Displays the TCP statistic counters.
Table 72 IP commands
Command Description