Configuration manual

Appendix H Command Interpreter 307
Nortel Business Secure Router 222 Configuration — Advanced
IEEE 802.1X commands
Table 77 lists and describes the IEEE 802.1x commands. Each of these commands
must be preceded by
8021x. For example, type 8021x debug level 1 to set
the IEEE 802.1X debug messages to the first level.
RADIUS commands
Table 78 lists and describes the RADIUS commands. Each of these commands
must be preceded by
radius. For example, type radius auth to display the
authentication server settings.
Table 77 IEEE 802.1X commands
Command Description
debug
level <level>
Sets the IEEE 802.1x debug message level
trace
Displays all supplicants information in the supplicant table.
user <user>
Displays all supplicants information related to the username.
Table 78 RADIUS commands
Command Description
auth
Displays the current RADIUS authentication server configuration.
acct
Displays the current RADIUS accounting server configuration.
checkRadID
Checks the RADIUS ID pool.
debug
Enables radius debug messages.