Configuration manual

334 Appendix K Log descriptions
NN47922-501
Use the sys logs display [log category] command to show the logs in an individual
Business Secure Router log category.
Use the sys logs clear command to erase all of the Business Secure Router’s logs.
Log command example
This example shows how to set the Business Secure Router to record the access
logs and alerts and then view the results.
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
# .time source destination notes
message
0|11/11/2002 15:10:12 |172.22.3.80:137 |172.22.255.255:137 |ACCESS BLOCK
Firewall default policy: UDP(set:8)
1|11/11/2002 15:10:12 |172.21.4.17:138 |172.21.255.255:138 |ACCESS BLOCK
Firewall default policy: UDP(set:8)
2|11/11/2002 15:10:11 |172.17.2.1 |224.0.1.60 |ACCESS BLOCK
Firewall default policy: IGMP(set:8)
3|11/11/2002 15:10:11 |172.22.3.80:137 |172.22.255.255:137 |ACCESS BLOCK
Firewall default policy: UDP(set:8)
4|11/11/2002 15:10:10 |192.168.10.1:520 |192.168.10.255:520 |ACCESS BLOCK
Firewall default policy: UDP(set:8)
5|11/11/2002 15:10:10 |172.21.4.67:137 |172.21.255.255:137 |ACCESS BLOCK