Configuration manual

60 Chapter 3 WAN and Dial Backup Setup
NN47922-501
Figure 12 Menu 11.2 remote node profile (Backup ISP)
Table 10 describes the fields in Figure 12.
Menu 11.2 - Remote Node Profile (Backup ISP)
Rem Node Name= GUI Edit PPP Options= No
Active= No Rem IP Addr= 0.0.0.0
Edit IP= No
Outgoing: Edit Script Options= No
My Login=
My Password= ******** Telco Option:
Retype to Confirm= ******** Allocated Budget(min)= 0
Authen= CHAP/PAP Period(hr)= 0
Pri Phone #= ? Schedules=
Sec Phone #= Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Press ENTER to Confirm or ESC to Cancel:
Press ENTER to Confirm or ESC to Cancel:
Table 9 Fields in menu 11.2 remote node profile (Backup ISP)
Field Description Example
Rem Node
Name
Enter a descriptive name for the remote node. This field
can be up to eight characters.
LAoffice
Active Press [SPACE BAR] and then [ENTER] to select Yes to
enable the remote node or No to disable the remote
node.
Yes
Outgoing
My Login Enter the login name assigned by your ISP for this
remote node.
jim
My Password Enter the password assigned by your ISP for this remote
node.
*****
Retype to
Confirm
Type the password again to make sure you have it
correct.
*****