Configuration manual

Chapter 3 WAN and Dial Backup Setup 63
Nortel Business Secure Router 222 Configuration — Advanced
Figure 13 Menu 11.2.1: Remote node PPP options
Table 10 describes the Remote Node PPP Options Menu, and contains
instructions about how to configure the PPP options fields.
Editing TCP/IP options
Move the cursor to the Edit IP field in menu 11.2, then press [SPACE BAR] to
select Yes. Press [ENTER] to open Menu 11.2.2 - Network Layer Options.
Menu 11.2.1 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Table 10 Remote node PPP options menu fields
FIELD DESCRIPTION EXAMPLE
Encapsulation Press [SPACE BAR] and then [ENTER] to select
CISCO PPP if your Dial Backup WAN device uses
Cisco PPP encapsulation, otherwise select
Standard PPP.
Standard PPP
(default)
Compression Press [SPACE BAR] and then [ENTER] to select
Yes to enable or No to disable Stac compression.
No
(default)