Configuration manual

82 Chapter 5 Internet access
NN47922-501
After configuring My Login and Password for PPP connection, press
[SPACE BAR] and then [ENTER] in the Encapsulation field in Menu 4
-Internet Access Setup to choose PPTP as your encapsulation option. This
brings up the screen show in Figure 23.
Figure 23 Internet access setup (PPTP)
Table 17 contains instructions about the new fields when you choose PPTP in the
Encapsulation field in menu 4.
Configuring the PPPoE client
If you enable PPPoE in menu 4, you will see the screen in figure 24. For more
information about PPPoE, see Appendix E, “PPPoE,” on page 253.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPTP
Service Type= N/A
My Login= username
My Password= ******
Retype to Confirm= ******
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address=N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Table 17 New fields in menu 4 (PPTP) Screen
Field Description Example
Encapsulation Press [SPACE BAR] and then press [ENTER] to
choose PPTP. The encapsulation method influences
your choices for the IP Address field.
PPTP
Idle Timeout This value specifies the time, in seconds, that elapses
before the Business Secure Router automatically
disconnects from the PPTP server.
100
(default)