Configuration manual

Chapter 5 Internet access 83
Nortel Business Secure Router 222 Configuration — Advanced
Figure 24 Internet access setup (PPPoE)
Table 18 describes the fields in Figure 24.
If you need a PPPoE service name to identify and reach the PPPoE server, go to
menu 11 and enter the PPPoE service name provided to you in the Service Name
field.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Service Type= N/A
My Login=
My Password= ********
Retype to Confirm= ******
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= Full Feature
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Table 18 New fields in menu 4 (PPPoE) screen
Field Description Example
Encapsulation Press [SPACE BAR] and then press [ENTER] to
choose PPPoE. The encapsulation method
influences your choices in the IP Address field.
PPPoE
Idle Timeout This value specifies the time in seconds that
elapses before the Business Secure Router
automatically disconnects from the PPPoE server.
100
(default)