Configuration manual

86 Chapter 6 Remote Node setup
NN47922-501
Figure 25 Menu 11 Remote Node Setup
Remote Node profile setup
This section explains how to configure the remote node profile menu.
Ethernet Encapsulation
There are two variations of menu 11.1 depending on whether you choose
Ethernet Encapsulation or PPPoE Encapsulation. You must choose the
Ethernet option when the WAN port is used as a regular Ethernet. The first
menu 11.1 screen you see is for Ethernet encapsulation shown in Figure 26.
Menu 11 - Remote Node Setup
1. ChangeMe (ISP, SUA)
2. -GUI (BACKUP_ISP, SUA)
Enter Node # to Edit: