Configuration manual

Chapter 6 Remote Node setup 89
Nortel Business Secure Router 222 Configuration — Advanced
Figure 27 Menu 11.1: Remote Node profile for PPPoE Encapsulation
Outgoing Authentication Protocol
Generally speaking, you must employ the strongest authentication protocol
possible. However, some vendors’ implementation includes a specific
authentication protocol in the user profile. It disconnects if the negotiated protocol
is different from that in the user profile, even when the negotiated protocol is
stronger than specified. If you encounter a case where the peer disconnects right
after a successful authentication, make sure that you specify the correct
authentication protocol when connecting to such an implementation.
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= PPPoE Edit IP= No
Service Type= Standard Telco Option:
Service Name= Allocated Budget(min)= 0
Outgoing: Period(hr)= 0
My Login= Schedules=
My Password= ******** Nailed-Up Connection= No
Retype to Confirm= ********
Authen= CHAP/PAP
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.