Configuration manual

Chapter 6 Remote Node setup 93
Nortel Business Secure Router 222 Configuration — Advanced
Figure 29 Menu 11.1.2: Remote Node Network Layer Options for Ethernet
Encapsulation
This menu displays the My WAN Addr field for PPPoE and PPTP
encapsulations and Gateway IP Addr field for Ethernet encapsulation.
Table 22 describes the fields in Figure 29.
Menu 11.1.2 - Remote Node Network Layer Options
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Addr= N/A
Network Address Translation= SUA Only
Metric= N/A
Private= N/A
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Table 22 Remote Node Network Layer Options Menu Fields
Field Description Example
IP Address
Assignment
If your ISP did not assign you an explicit IP address, press
[SPACE BAR] and then [ENTER] to select Dynamic;
otherwise select Static and enter the IP address & subnet
mask in the following fields.
Dynamic
(default)
(Rem) IP
Address
If you have a Static IP Assignment, enter the IP address
assigned to you by your ISP.
(Rem) IP
Subnet Mask
If you have a Static IP Assignment, enter the subnet mask
assigned to you.