Configuration manual

106 Chapter 9 Network Address Translation (NAT)
NN47923-501
Figure 36 Menu 4 – Applying NAT for Internet Access
Figure 37 shows how you apply NAT to the remote node in menu 11.1.
Enter 11 from the main menu.
Move the cursor to the Edit IP/Bridge field, press [SPACE BAR] to select Yes
and then press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer
Options.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Dynamic
IP Address= N/A
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel: