Configuration manual

112 Chapter 9 Network Address Translation (NAT)
NN47923-501
Figure 41 Menu 15.1.1: First Set
Ordering your rules
Ordering your rules is important because the Business Secure Router applies the
rules in the order that you specify. When a rule matches the current packet, the
Business Secure Router takes the corresponding action and the remaining rules
are ignored. If there are any empty rules before your new configured rule, your
configured rule is pushed up by that number of empty rules. For example, if you
have already configured rules 1 to 6 in your current set and now you configure
rule number 9. In the set summary screen, the new rule will be rule 7, not 9.
Menu 15.1.1 - Address Mapping Rules
Set Name= NAT_SET
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- ------
1.
2
3.
4.
5.
6.
7.
8.
9.
10.
Action= Edit Select Rule=
Press ENTER to Confirm or ESC to Cancel:
Note: The Type, Local and Global Start/End IPs are configured in
menu 15.1.1.1 (described later) and the values are displayed on the
screen shown in Figure 42.