Configuration manual

170 Chapter 14 System information and diagnosis
NN47923-501
Figure 83 Menu 24.3 – System Maintenance: Log and Trace
Syslog logging
The Business Secure Router uses the syslog facility to log the CDR (Call Detail
Record) and system messages to a syslog server. Syslog and accounting can be
configured in Menu 24.3.2 - System Maintenance - Syslog Logging, as shown
in Figure 84.
Figure 84 Menu 24.3.2 – System Maintenance: Syslog Logging
Configure the syslog parameters described in Table 39 to activate syslog, and then
choose what you want to log.
Menu 24.3 - System Maintenance - Log and Trace
2. Syslog Logging
4. Call-Triggering Packet
Press ENTER to Confirm or ESC to Cancel
Menu 24.3.2 - System Maintenance - Syslog Logging
Syslog:
Active= No
Syslog Server IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel
Table 39 System Maintenance Menu Syslog Parameters
Parameter Description
Syslog:
Active Press [SPACE BAR] and then [ENTER] to turn syslog on or off.