Configuration manual

188 Chapter 15 Firmware and configuration file maintenance
NN47923-501
8 Enter quit to exit the ftp prompt. The Business Secure Router automatically
restarts after a successful restore process.
Restore using FTP session example
Figure 95 Restore using FTP session example
Refer to Chapter 17, “Remote Management,” on page 209 to read about
configurations that disallow TFTP and FTP over WAN.
Restore via console port
Restore configuration via console port by following the HyperTerminal
procedure. Procedures using other serial communications programs are similar.
Display menu 24.6 and enter y at the prompt.
Figure 96 System Maintenance: Restore Configuration
Figure 97 indicates that the Xmodem download has started.
ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):