Configuration manual

Chapter 15 Firmware and configuration file maintenance 189
Nortel Business Secure Router 252 Configuration — Advanced
Figure 97 System Maintenance: Starting Xmodem Download Screen
Run the HyperTerminal program by clicking Transfer, then Send File.
After a successful restoration, the screen shown in Figure 98 appears. Press any
key to restart the Business Secure Router and return to the SMT menu.
Figure 98 Successful Restoration Confirmation Screen
Uploading Firmware and Configuration Files
This section shows you how to upload firmware and configuration files. You can
upload configuration files by following the procedure “Restore configuration” on
page 186, or by following the instructions in Menu 24.7.2 – System
Maintenance – Upload System Configuration File.
Starting XMODEM download (CRC mode) ...
CCCCCCCCC
Save to ROM
Hit any key to start system reboot.
Warning: Do not interrupt the file transfer process as this can
permanently damage your Business Secure Router.
Type the configuration
file’s location, or click
Browse to search for it.
Choose the Xmodem
protocol.
Click Send.