Configuration manual

Chapter 15 Firmware and configuration file maintenance 195
Nortel Business Secure Router 252 Configuration — Advanced
Uploading Xmodem firmware using HyperTerminal
1 Click Transfer, and then Send File to display the screen in Figure 103.
Figure 103 Example Xmodem Upload
2 After the configuration upload process is complete, restart the Business
Secure Router by entering
atgo.
Uploading configuration file via console port
1 Select 2 from Menu 24.7 – System Maintenance – Upload Firmware to
display Menu 24.7.2 – System Maintenance – Upload System
Configuration File. Follow the instructions as shown in Figure 104.
Type the configuration
file’s location, or click
Browse to search for it.
Choose the Xmodem
protocol
Click Send.