Configuration manual

Appendix G Command Interpreter 269
Nortel Business Secure Router 252 Configuration — Advanced
remove <set 1-3>
Removes extra phone numbers.
reset
Resets node and mask.
feature
Displays a list of the device’s major
features.
firmware
Displays the ISDN firmware type.
firewall
See “Sys firewall commands” on
page 294 for information about the
system firewall commands.
hostname [hostname]
Sets or displays the system name.
logs
category
8021x
Records logs for IEEE 802.1X.
access [0:none/1:log/
2:alert/3:both]
Records, sends alerts, or both for
access control logs.
attack [0:none/1:log/
2:alert/3:both]
Records, sends alerts, or both for
firewall attack logs.
cdr [0:none/1:log]
Records Call Detail Record logs.
display
Displays the category settings.
error [0:none/1:log/
2:alert/3:both]
Records, sends alerts, or both for
system error logs.
icmp [0:none/1:log]
Records ICMP logs.
ike [0:none/1:log/2:alert/
3:both]
Records, sends alerts or both for
access control logs.
ipsec [0:none/1:log/
2:alert/3:both]
Records the access control logs
javablocked [0:none/1:log]
Records the java blocked logs.
mten [0:none/1:log]
Records the system maintenance logs.
packetfilter [0:none/
1:log]
Records the packet filter logs.
ppp [0:none/1:log]
Records the PPP logs.
remote [0:none/1:log]
Records the remote management logs.
tcpreset [0:none/1:log]
Records the TCP reset logs.
upnp [0:none/1:log]
Records the UPnP logs.
Table 64 Sys commands
Command Description