Configuration manual

Appendix G Command Interpreter 275
Nortel Business Secure Router 252 Configuration — Advanced
load
Saves UPnP information.
reserve [0:deny/1:permit]
save
Saves UPnP information.
socket
Displays the system socket’s ID #,
type, control block address (PCB), IP
address and port number of peer
device connected to the socket
(Remote Socket) and task control block
(Owner).
filter
netbios
disp
Displays the current NetBIOS filter
modes.
config <0:Between LAN and
WAN/ 3: IPSec Pass through/
4: Trigger Dial> <on|off>
Sets NetBIOS filters.
ddns
debug <level>
Enables or disables DDNS service.
display <iface name>
Displays DDNS information.
restart
Restarts DDNS.
logout
This command has no effect.
cpu
display
Displays the CPU utilization.
Table 64 Sys commands
Command Description