Configuration manual

278 Appendix G Command Interpreter
NN47923-501
edit <0: first|1:
second|2: third>
<0:from
ISP|1:usr-def|2:n
one> [IP addr
ess if choosing
1]
Configures the system DNS server settings.
lan edit <0: first|1:
second|2: third>
<0:from
ISP|1:usr-def|2:D
NS Relay|3: n
one> [IP address
if choosing 1]
Configures the LAN DNS server settings.
display
Shows the LAN DNS server settings.
httpd debug [on|off]
Enables or disables the HTTP debug flag.
This command currently does not work.
icmp
status
Displays the ICMP statistics counter.
discovery <iface> [on|off]
Sets the ICMP router discovery flag.
ifconfig [iface] [ipaddr]
[broadcast <addr>
|mtu
<value>|dynamic]
Configures a network interface.
ping <hostid>
Pings a remote host.
route
status [if]
Displays the routing table.
add <dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
Adds a route.
addiface <dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
Adds an entry to the routing table for the
specified interface.
addprivate <dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
Adds a private route.
drop <host addr> [/
<bits>]
Drops a route.
Table 67 IP commands
Command Description