Configuration manual

282 Appendix G Command Interpreter
NN47923-501
private <yes|no>
Turns private mode on or off.
active <yes|no>
Enables or disables a static route rule.
dropIcmp [0|1]
Sets whether or not the device allows ICMP
fragment packets.
igmp
debug [level]
Sets IGMP debug level.
forwardall [on|off]
Activates or deactivates IGMP forwarding to
all interfaces flag.
querier [on|off]
Turns on or off IGMP stop query flag.
iface
<iface> grouptm
<timeout>
Sets IGMP group timeout for the specified
interface.
<iface> interval
<interval>
Sets IGMP query interval for the specified
interface.
<iface> join
<group>
Adds an interface to a group.
<iface> leave
<group>
Removes an interface from a group.
<iface> query
Sends an IGMP query on the specified
interface.
<iface> rsptime
[time]
Sets the IGMP response time.
<iface> start
Turns on IGMP on the specified interface.
<iface> stop
Turns off IGMP on the specified interface.
<iface> ttl
<threshold>
Sets the IGMP Time To Live threshold.
<iface> v1compat
[on|off]
Turns on or off IGMP version 1 compatibility
on the specified interface.
robustness <num>
Sets the IGMP robustness variable.
status
Displays the IGMP status.
alg
display
Shows whether the Application Layer
Gateway is enabled or disabled.
siptimeout <timeout in
second> or 0 for
no timeout
Sets the SIP timeout period.
Table 67 IP commands
Command Description