Configuration manual

Appendix G Command Interpreter 289
Nortel Business Secure Router 252 Configuration — Advanced
sourceStart
Sets the exempt host’s source start IP
address.
sourceEnd
Sets the exempt host’s source end IP
address.
destStart <IP address>
Sets the exempt host’s destination start
IP address.
destEnd <IP address>
Sets the exempt host’s destination end IP
address.
save
Saves an exempt host.
btNatList
Displays the branch tunnel NAT entries.
clientTerm
load
Loads client termination configuration
from ROM to working buffer, you must
execute this command before configuring
client termination.
active <yes | no>
Enables or disables client termination.
display [user | cfg]
Displays configuration and/or remote
user logon status of client termination,
unless a parameter is specified, displays
all.
save
Saves any client termination
configuration changes to ROM.
auth local <on |
off>
Enables or disables Local User Database
authentication method.
local psk <on |
off>
Enables or disables the Pre-Shared Key
authentication method for the Local User
Database.
radius <on |
off>
Enables or disables the RADIUS Server
authentication method.
radius groupId
Configures Group ID fields for RADIUS
Server authentication method.
radius groupPwd
Configures Group Password fields for
RADIUS Server authentication method.
radius psk <on
| off>
Enables or disables Pre-Shared Key
authentication type for RADIUS Server.
Table 68 IPSec commands
Command Description