Configuration manual

Appendix G Command Interpreter 293
Nortel Business Secure Router 252 Configuration — Advanced
reset Resets the ADSL modem, and must reload the
modem code again.
status Displays ADSL status (ex: up, down or wait for
init).
version Shows the ADSL firmware version.
atm
vchunt
Add
<remoteNodeI
ndex> <vpi>
<vci>
Adds an entry to the hunting pool.
<remote node> : input the remote node index
1-8
<vpi> : vpi value
<vci> : vci value
Need to save after this command.
Remove
<removeNodeI
d> <vpi>
<vci>
Sets remote node ID and VPI, VCI value to
remove the specific entry. System will save
automatically.
Active
<yes|no>
Enables/disables VC auto hunting feature.
display Displays the hunt pool.
Clear Clears the configuration.
Save Saves current setting to the ROM file.
timer Sets the waiting time before checking the
hunting table result.
Send Sends VC hunt pattern again.
hwsar Displays hwsar packets incoming/outgoing
information.
driver
Oamloopback
[VPI] [VCI]
[F5]
[endToEnd]
[funcType]
Oam loopback function.
Table 69 WAN Commands (continued)
Command Description