Configuration manual

298 Appendix G Command Interpreter
NN47923-501
Certificates commands
Table 72 describes the certificate commands. Each of these commands must be
preceded by
certificates (or cert for short). For example, type cert
my_cert list
to display all of your certificate names and basic information.
All of these commands start with
certificates.
monitor lan <#>
Displays the bandwidth usage
of the specified LAN class (or
all of the LAN classes if you do
not specify one). The first time
you use the command turns it
on; the second time turns it off,
and so on.
wan <#>
Displays the bandwidth usage
of the specified WAN class (or
all of the WAN classes if you
do not specify one). The first
time you use the command
turns it on; the second time
turns it off, and so on.
moveFilter <
channName>
<from> <to>
Changes the filter order.
<channName>: LAN, WAN
<from>: filter index number
<to>: filter index number
config save
Saves the BWM configuration.
load
Loads the BWM configuration.
clear
Clears the BWM configuration.
Table 72 Certificates commands
Command Description
my_cert
create
Table 71 Bandwidth management commands
Command Description