Configuration manual

328 Appendix J Log descriptions
NN47923-501
Log commands
Go to the command interpreter interface (see Appendix G, “Command
Interpreter” on page 267 for information on how to access and use the
commands).
Local User Database does not
support authentication method.
The local user database only supports the
EAP-MD5 method. A user tried to use another
authentication method and was not authenticated.
User logout because of session
timeout expired.
The router logged off a user whose session
expired.
User logout because of user
deassociation.
The router logged off a user who ended the
session.
User logout because of no
authentication response from
user.
The router logged off a user from which there was
no authentication response.
User logout because of idle
timeout expired.
The router logged off a user whose idle timeout
period expired.
User logout because of user
request.
A user logged off.
Local User Database does not
support authentication mothed.
A user tried to use an authentication method that
the local user database does not support (it only
supports EAP-MD5).
No response from RADIUS. Pls
check RADIUS Server.
There is no response message from the RADIUS
server, check the RADIUS server.
Use Local User Database to
authenticate user.
The local user database is operating as the
authentication server.
Use RADIUS to authenticate
user.
The RADIUS server is operating as the
authentication server.
No Server to authenticate user.
There is no authentication server to authenticate
a user.
Local User Database does not
find user`s credential.
A user was not authenticated by the local user
database because the user is not listed in the
local user database.
Table 90 IEEE 802.1X logs
Log Message Description