Configuration manual

66 Chapter 3 WAN and Dial Backup Setup
NN47923-501
Figure 14 Menu 11.3 – Remote Node Network Layer Options
Table 12 describes the fields in Figure 14.
Menu 11.3 - Remote Node Network Layer Options
IP Options: Bridge Options:
IP Address Assignment = Dynamic Ethernet Addr Timeout(min)=
N/A
Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set= N/A
Metric= 15
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Table 12 Remote Node Network Layer Options Menu Fields
Field Description Example
IP Address
Assignment
If your ISP did not assign you an explicit IP address, press
[SPACE BAR] and then [ENTER] to select Dynamic;
otherwise select Static and enter the IP address & subnet
mask in the following fields.
Dynamic
(default)
Rem IP
Address
Leave this field set to 0.0.0.0 to have the ISP or other
remote router dynamically (automatically) send its IP
address if you do not know it. Enter the remote gateway’s
IP address here if you know it (static).
0.0.0.0
(default)
Rem Subnet
Mask
Leave this field set to 0.0.0.0 to have the ISP or other
remote router dynamically send its subnet mask if you do
not know it. Enter the remote gateway’s subnet mask here
if you know it (static).
0.0.0.0
(default)