Configuration manual

Chapter 4 LAN setup 75
Nortel Business Secure Router 252 Configuration — Advanced
Figure 20 Menu 3.2 – TCP/IP and DHCP Ethernet setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server TCP/IP Setup:
Client IP Pool:
Starting Address= 192.168.1.2 IP Address= 192.168.1.1
Size of Client IP Pool= 126 IP Subnet Mask= 255.255.255.0
First DNS Server= From ISP RIP Direction= None
IP Address= N/A Version= N/A
Second DNS Server= From ISP Multicast= None
IP Address= N/A Edit IP Alias= No
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Follow the instructions in Table 14 to configure the DHCP fields.
Table 14 DHCP Ethernet setup menu fields
Field Description Example
DHCP This field enables and disables the DHCP server.
If set to Server, your Business Secure Router will
act as a DHCP server.
If set to None, the DHCP server will be disabled.
Server
Configuration:
Client IP Pool
Starting Address
This field specifies the first of the contiguous
addresses in the IP address pool.
192.168.1.2