User's Manual

112 Nortel IP Phone 2004
Screen prompt
Description
S2 Port TPS Server 2 port number
Enter 4100.
S2 action
Same as S1.
You are not prompted for S2 PK
if S2 Action is set to 1.
S2 retry count Same as S1.
S2 PK
To manually configure the PK,
set the Action Byte to 6. After
you enter the PK, apply the
changes and then change the
Action Byte to 1, if required.
Default is ffffffffffffffff.
The Private key of the alternate
Secure Multimedia Controller to
which the IP Phone connects.
If you use a Secure Multimedia
Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits from a to
f, enter the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
Speed (0-A, 1-10, 2-100) Network interface port speed.
Default 0 (for Auto)
0 = Auto
1 = 10 BT
2 = 100 BT
Duplex (0-A, 1-F, 2-H) Default 1 (for Auto).
0 = Auto
1 = Full
2 = Half
You are not prompted for Duplex
if Speed is set to 0 for Auto.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.