User's Manual

116 Nortel IP Phone 2004
A Signaling Server provides the firmware for the IP Phones. For
information about upgrading IP Phone firmware, see IP Line Fundamentals
(NN43100-500). For information about the IP Phone firmware
upgrade using Element Manager, see Element Manager System
Reference—Administration (NN43001-632)
Check the Nortel Web site for updated firmware files. See
w
ww.nortel.com/downloadingcontent
for download instructions. Go to
Product Category: Phones, Clients & Accessories, Product Name: IP
Phone 2004, Content type: Firmware. Obtain the precise Release, Status,
and Title of the file from your next level of support.
ATTENTION
Timing information
There are only four seconds between plugging in the IP Phone 2004 power
transformer and the appearance of the Nortel logo in the middle of the display.
When you see the logo, you have one second to respond by pressing the four
soft keys at the bottom of the display in sequence from left to right, one at a
time. If you miss the one-second response time, the IP Phone 2004 attempts to
locate the connect server. You can begin the power-up sequence again, or you
can double-press the Services key to open the network diagnostic utilities to
access the IP Phone settings. See “IP Phone diagnostic utilities” (page 493).
To edit network configuration, the following soft keys are available:
• OK—accept current settings and proceed to the next configuration
option. If all configuration options are presented, the configuration is
saved and the IP Phone reboots with the saved changes.
•
BkSpace—erase a configuration entry to change it
•
Clear—clear an entire configuration entry
•
Cancel—cancels network configuration. The IP Phone reboots without
saving changes.
ATTENTION
When you install the IP Phone for the first time the first prompt that appears is
the DCHP? [0-N, 1-Y]. Not all of the listed screen prompts appear on the phone
display during the first time installation of the phone.
Procedure 20
Installing an IP Phone 2004 using DHCP
Step Action
1 Power your IP Phone.
2 When the Nortel logo appears in the middle of the display,
immediately press the four soft keys at the bottom of the display
in sequence from left to right.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.