User's Manual

Installation and configuration 119
Screen prompt
Description
S1 PK
To manually configure the PK,
set the Action Byte to 6. After
you enter the PK, apply the
changes and then change the
Action Byte to 1, if required.
Default is ffffffffffffffff.
The Private key of the Secure
Multimedia Controller to which
the IP Phone connects.
If you use a Secure Multimedia
Controller, enter a 16-digit
hexadecimal number.
To enter ALPHA digits from a
to f, enter the following:
#1 = A
#2 = B
#3 = C
#4 = D
#5 = E
#6 = F
S2 IP The secondary CS 1000 node
IP address for the IP Phone
2004.
S2 Port TPS Server 2 port number
Enter 4100.
S2 action
Same as S1.
You are not prompted for S2
PK if S2 Action is set to 1.
S2 retry count Same as S1.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.07
5 February 2009
Copyright © 2003-2009 Nortel Networks
.